Welcome!
Up to Renesas Rulz
Welcome!!
You may notice that RenesasRulz.com is a new website dedicated to Renesas microcontroller and microprocessors. RenesasRulz.com is the only official, US based, 3rd party website for Renesas MCUs and MPUs. However, Renesas does NOT control, maintain, endorse, or certify ANYTHING on this site. Everything on RenesasRulz.com is for reference only and neither Renesas or RenesasRulz.com takes any responsibility for errors, omissions, inaccuracies, etc, etc. Get it? Good!
You may notice that RenesasRulz.com is a new website dedicated to Renesas microcontroller and microprocessors. RenesasRulz.com is the only official, US based, 3rd party website for Renesas MCUs and MPUs. However, Renesas does NOT control, maintain, endorse, or certify ANYTHING on this site. Everything on RenesasRulz.com is for reference only and neither Renesas or RenesasRulz.com takes any responsibility for errors, omissions, inaccuracies, etc, etc. Get it? Good!
Hi.
Just wanted to say Hi! here after Mr. Grier pointed me to this website.
I think this site has great potential, with a lot of possible uses.
A little about myself: my name in real life is Johan, I'm a teacher in embedded systems (among others) and located in Vaasa, Finland. A project I recently did was participating with my students in RoboCup ( http://robotics.puv.fi and http://www.robocup.org ), but robots have been used in my teachings for much longer.
I have to confess that our robots from RoboCup were using Atmel (sorry) but this will hopefully change to Renesas. We did use M16C and M32C in the past however on some projects, and I'm cleaning up some of that code right now (LwIP port to M16C and M32C).
Best regards,
Johan
Just wanted to say Hi! here after Mr. Grier pointed me to this website.
I think this site has great potential, with a lot of possible uses.
A little about myself: my name in real life is Johan, I'm a teacher in embedded systems (among others) and located in Vaasa, Finland. A project I recently did was participating with my students in RoboCup ( http://robotics.puv.fi and http://www.robocup.org ), but robots have been used in my teachings for much longer.
I have to confess that our robots from RoboCup were using Atmel (sorry) but this will hopefully change to Renesas. We did use M16C and M32C in the past however on some projects, and I'm cleaning up some of that code right now (LwIP port to M16C and M32C).
Best regards,
Johan
Johan,
Thanks for joining. Please wait a couple of days (like until 7/25) then go to www.RenesasUniversity.com [renesasuniversity.com]. The site should be opened and the Registrations working at that time. While you are in Europe, I would be happy to support you from the Americas until we can get our European group to be directly supporting the site.
My direct email address is RenesasUniversity.RTA@Renesas.com.
I am: Todd DeBoer, Director of Sales Activation
Thanks for joining. Please wait a couple of days (like until 7/25) then go to www.RenesasUniversity.com [renesasuniversity.com]. The site should be opened and the Registrations working at that time. While you are in Europe, I would be happy to support you from the Americas until we can get our European group to be directly supporting the site.
My direct email address is RenesasUniversity.RTA@Renesas.com.
I am: Todd DeBoer, Director of Sales Activation
Powered by
Ploneboard

