I2C via interrupt

Hi!

I have programming problem in I2C interface on SH7201.

It is inadmissibly to have endless loop ("while(P_IIC2.ICSR.BIT.TEND==0) " or "while(P_IIC2.ICSR.BIT.TDRE==0) " )

in my I2C driver for real-time kernel.

How can I solve this problem without "waits" via interrupt request ?

Thanks

There's a number of app notes that address interrupt based I2C communications drivers on the Renesas websites (the EU one sometimes has more.)

http://eu.renesas.com/request?LANGUAGE_CD=EN&LAYER_ID=1&SCREEN_ID=ViewUsrFrameApnDocumentSearch&FUNCTION_CD=I2C-bus&DOC_TYPE=Application%20Notes&FUNCTION_FLG=1&FUNC_OR_APP=F

The app notes written for the H8 series parts and SH will be the best to look at, although the M16C app notes will also have good info too.