Schematic and DIP package adapter for the R8C/13

On the Eagle CAD website Glyn - Elektor uploaded a Schematic and DIP package adapter for the R8C/13.

RC8 Adapter

It was uploaded in May here:

http://www.cadsoft.de/cgi-bin/download.pl?page=/home/cadsoft/html_public/download.htm.en&dir=eagle/userfiles/projects

Good news is it can be used as a starting point for other R8C layouts with this CAD package.

Document Actions

Additional Changes Required

Posted by Abhijit Bose at Jan 01, 2008 06:49 PM

Hi,

This board is good but its a double sided board and the Jumpers at the bottom of the chip are difficult to solder.
Please update the PCB is its possible to make it single sided.

Regards,
Boseji